Posts Tagged ‘egan building automation’

Attention to Energy Efficiency and a Family-Like Bond

Thursday, December 17th, 2020

Below the 2.4 million square foot office tower and retail building sits a tight-knit team, focused on energy efficiency and continuous monitoring.

Located in the “center” of Minneapolis, the 33 Tower / City Center building is a Class A high-rise. At nearly 40 years old, its unique layout includes a retail mall, skyways, parking garage, and tower–the fourth tallest in Minneapolis. Prominent tenants include Target Corporation, Korn/Ferry International, and many other well-known organizations and retail stores.

In the corner of the lower-level space hangs a fitting sentiment: “Hail to the Chief”. Chief Engineer Tim Stefans has been with the building since 1980. He, along with his team of engineers, is committed to world-class building management procedures for energy efficiency and water efficiency standards.

There is not another building of this nature in the city of Minneapolis,” said Stefans, “and with this building, everything we do is about quality.

Best of the Best Energy Standards

Being in a class of its own, 33 Tower / City Center quietly boasts two impressive accolades: Certified LEED Platinum and an ENERGY STAR® Score of 97.

The Certified LEED Platinum distinction is the highest mark of quality and achievement in green buildings. According to The U.S. Green Building Council’s LEED (Leadership in Energy and Environmental Design) program, “LEED certification means healthier, more productive places, reduced stress on the environment by encouraging energy and resource-efficient buildings, and savings from increased building value, higher lease rates and decreased utility costs.” 

Additionally, 33 Tower is an ENERGY STAR® certified building. The certification, backed by The U.S. Environmental Protection Agency (EPA) is described as, “certified buildings save energy, save money, and help protect the environment by generating fewer greenhouse gas emissions than typical buildings.” 

Twelve years ago, the engineering team began benchmarking energy performance to measure and track the building’s energy, water, and/or waste and materials usage. It uses the ENERGY STAR Portfolio Manager® tool, which has become the industry standard for rating a facility’s energy performance. 33 Tower’s 2020 ENERGY STAR score is 97, which means it’s more efficient than 97% of comparable buildings.

33 Tower has even received national recognition; two years ago, the building earned itself the title of “most energy efficient in the nation”.

Value of Team Longevity and Common Goals

33 Tower / City Center was ten years old when Egan Company (Building Control Group) was introduced to work on a small-scale project, in support of a desire to pay attention to energy and reinvest in the building.

Now locally managed by Ryan Companies, Inc, the building’s ownership went through a phase of rapid change. However, in the over 25 years working together, the building’s engineering team—along with the Egan team—has largely remained unchanged.

As long-standing partners, the teams at 33 Tower / City Center and Egan Company have a relationship built on trust and a shared goal: to improve the building’s sustainability and continuously evaluate building performance. Through this shared care about monitoring through the years, Egan trades have worked on systematic replacement of older systems and equipment, software/hardware updates, lighting upgrades, as well as technology design and function.

Among many who have worked with the team for nearly two decades, Egan Company Account Manager Brett Rasmussen started working onsite as a field technician in 2003. “Our long standing relationship has been built on understanding expectations and performing to them,” said Rasmussen. “Egan has a great working knowledge of this building and what is expected and needed for it to run efficiently. The building is not very forgiving, and a small error can translate to a big problem with such a large facility. But we also have some of the best field personnel in the industry. That, combined along with our experience and understanding of this building, whatever hurdle gets thrown at us, we make it disappear. Ultimately, we work hard to keep it running at a level that speaks for itself.”

The Egan team has become so much of an extension of the building team that at many times, there’s such a seamless level of work that Stefans and his team don’t experience disruption when Egan is working in the building. Referring to the latest project, Stefans adds:

I’ve got to tell you, we didn’t even know Egan was in the building. We didn’t even know—that’s how integrated this is. Now that’s phenomenal. I mean, if there’s a 10, these [Egan] guys are an 11. Rob LeMay, Ross Keane, Alex West, Aaron McDonough, Lawrence ‘Doc’ Bush, Jon Wall, and Dan Aberwald . . . they’re phenomenal. Ridiculously phenomenal.

Room to Improve Energy Efficiency

To further improve energy efficiency in 2020, the plan was set to migrate legacy technology to 21st century controls.

“For as long as I’ve ever been doing this, there’s never been a more complex job than what we’ve done in the last year. Really, nothing has ever been this complex and working through how to marry this new system,” Stefans shares, referring to the interactions between technology, building systems, the geometry of building, and the connected structures (skyways and newly-built hotel). 

As equipment moves toward obsolescence, Egan looks for opportunities to bring new technology and design to the table. As a result for 33 Tower / City Center, this year’s project was a large-scale retrofit representative of the need for modernization. And while projects like this provide a long term solution to a hardware problem, they also provide a means to improve efficiencies to positively impact the bottom line.

Read more about Egan’s recent project in upgrading the 33 Tower / City Center’s building automation system from I/Net controls to EcoStruxure >

Building Optimization with an Intelligent System

Saturday, July 25th, 2020

Internet of Things (IoT) is a concept of connecting the computing equipment and smart devices within one location with other locations and equipment across the world—providing a giant network of connected devices and objects into one centralized hub. It’s possible to connect something as small as a light bulb to something as big as an entire building’s operation. These concepts aren’t new, but have taken time to come to fruition. Due to advances in technologies, ease of implementation, and a higher return on investment, this is quickly changing.

Advanced Monitoring, Maintaining, and Reporting

Schneider Electric recently introduced EcoStruxure Building Advisor, an intelligence system for buildings. As an integrator, Egan Company implements this system and provides consultations to facility managers. Building Advisor can provide:

  • Monitoring of equipment failure
  • Insights into energy consumption and mechanical cost-saving initiatives
  • Improved building efficiency by working with an engineering team

In the past, it used to take an experienced facility manager years to understand and optimize building performance. Now, the introduction of this technology makes it possible to gain immediate insights into a building’s inefficiencies, drifts from optimal parameters, and potential equipment failure that can all be used to quickly improve the bottom line, enhance operations, and provide a better working environment.

Typically utilizing the current building automation system infrastructure of sensors and control equipment, EcoStruxure Building Advisor analyzes the operation of a facility and provides the facility manager with detailed information about equipment operation. In addition, this information is scored as to its impact on the energy, comfort, and maintenance of a diagnosed issue. Coupling this information with utility and equipment data, Building Advisor will estimate the current bottom line impact on a deficiency and the potential return on investment for system improvement.

Reducing Operating Expenses for Optimal Experience

Constant monitoring of building expenditures will also reduce costs through early identification of equipment failures or inefficiencies. Monitoring equipment abnormalities will predict likely failure (and provide solutions to fix it before it does). By being proactive in identifying equipment failure, facility managers will reduce downtime experienced by occupants and make for less expensive repair costs and reduced occupant impact.

This technology doesn’t just provide a list of failed equipment and temperatures outside of range, but ongoing access to an energy engineer, working with the facility team to address the issues found, recommend solutions, and provide accountability and support. Continual commissioning of a building is required to maintain peak operation.

Our customers are always looking for innovative ways to reduce operating costs, and if we can cut costs on their monthly utility bill without the expense of tenant comfort, I’d say that’s a win,” said Kirk Wahlstrom, Egan Company Building Automation Manager. “We’ve piloted EcoStruxure Building Advisor at our own facilities and have benefited from the insights. We’re excited about growing this technology to help our customers not only reduce downtime and cost but improve their building’s value.

.

As technology continues to grow and evolve, facility managers—like the rest of the world—will need to continue heavy investment into IoT. These trends and technologies are here to make our lives easier, comfortable, and more secure.

For more information about EcoStruxure Building Advisor, view this 3 minute introduction video >> or request a demo to explore more about how this technology might be implemented in your facility.

KEEPING OUR PROMISES AS ONE EGAN COMPANY

Wednesday, July 8th, 2020

If you’ve been in the industry a while, you may remember a few of our former names – Egan Companies or The Egan Companies. If you’ve really been in the industry a while, you might recall our original name, Egan & Sons Plumbing and Heating Company which was founded by Joseph Egan and his sons Bill and Costney.

For 75 years, Egan Company has offered an array of specialty trades and professional services across the industry; and for many of those 75 years, the diverse skills and trades were divided into a number of individual companies and brands. Egan Company as we know it today is only 15 years old!

Over the years, Egan diversified and merged with existing mechanical, electrical, automation, technology, controls, and a number of other specialties. Each specialty then had its  own unique brand. The brands below consolidated to one corporate identity Egan Companies, Inc. in 2002 before evolving to simply become Egan Company years later:

  • Egan Mechanical Contractors, Inc.
  • Egan-McKay Electrical Contractors, Inc.
  • Egan Automation, Inc.
  • InterClad, Inc.
  • E&S Insulation Co.
  • The Egan Companies

This consolidation and positioning triggered an opportunity to develop a new brand promise and logo that would encompass all of Egan’s specialty trades and services—and represent the only company in our local markets with capabilities and services that are unmatched by anyone.

Fun Facts:

  • Egan’s old familiar logo was the letter “E” constructed of two triangles and three rectangles.  Depending on the entity, the logo was either black, red, green, blue, or maroon and was the Egan brand for almost twenty years.
  • The base of our current Egan logo was formed by three grids that represent the mechanical, electrical and systems business functions. This joined frame structure emphasizes the fact that each of our business groups is dependent on the others working together and doing its separate and combined job to support the Egan brand. Supported by this grid base, EGAN stretches across all three grids linking them together as one.
  • To ensure our dedication to our customers and community was highlighted as well, a new tagline was added, Building on Promises Kept. This reflects our long history of building in the Midwest and our commitment to keeping our promises, always. It serves to remind us to focus on the integrity of doing what we say we will do and when we will do it each day. It also serves to communicate to everyone who sees our logo that Egan stands behind our word, our promises.

NAIOP 2017 Awards of Excellence

Monday, October 8th, 2018

Among this year’s NAIOP Awards of Excellence are multiple projects of which the Egan team was proud to have worked. We are honored to get to partner with some o f the best in the business! Egan’s scope for the following awarded projects include:

AC Hotel

AC Hotel – InterClad

Downtown East – Building Automation

MacQueen Equipment – Electrical, Technology, Fire Alarm

OATI – Electrical

T3 – InterClad

For more information about NAIOP and the full list of award winning projects, see here.

EGAN COMPANY ELECTS MARK BROADWATER VICE PRESIDENT

Thursday, December 21st, 2017

MINNEAPOLIS, MN (December 21, 2017) – Egan Company, a Brooklyn Park specialty contractor, announced the promotion of Mark Broadwater to Vice President. In this role, Broadwater is responsible for leading the day-to-day operations, financials, and overall strategy and business development for the building automation, technology integration, and service teams.

Broadwater has over 22 years of experience in the electrical and construction industry, and joined Egan this fall. Throughout his career, he has held many roles including: Low-voltage Technician, Project Manager, General Manager, Vice President, and President of All Systems Installation, Inc. He has experience in the healthcare, financial, and education industries, and has worked closely with Wells Fargo and Mayo Clinic for many years. He graduated from Riverland Community College with a degree in Electrical Construction.

The Minneapolis-St. Paul Business Journal highlighted Broadwater’s promotion in its People on the Move feature.

About Egan Company
Egan Company is a privately-owned, specialty contractor providing building trades to general contractors, engineers, building owners, property managers, and facility engineers. Specialties include: electrical, mechanical, curtainwall/glazing/metal panels (InterClad), millwrights, building technology, controls and system integration, and 24/7 service. Egan serves every stage of a building and provides in-house expertise in planning, design and engineering, construction, and maintenance.

# # #

Media Contact:
Jessica Johnson
jkjohnson@eganco.com // 763-595-4310